All-in-one control solution

Flow and process control in one device


The control of liquids or levels requires many sensors and a valve. This results in many process connections and possible leakages. In addition to the necessary cabling, a flow computer is also required to compensate for influences such as medium temperature and process pressure during flow measurement. Many components and process connections generally increase a system's susceptibility to errors.


All the above-mentioned components are combined in one device in the world's first intelligent process node FOCUS-1. It contains the entire measuring technology, a pneumatic valve and a flow computer. Thus, only two flange connections are necessary and possible leakage risks are reduced to a minimum.

Safety benefits

  • Extremely high fail-safe temperature, pressure and flow measurement through redundant sensors and digital twin

  • Fully integrated diagnostic options ensure trouble-free operation: e.g. cavitation detection, valve leakage according to class 2, IEC 60534-4

  • Maximum reduction of susceptibility to faults due to significantly reduced wiring: FOCUS-1 requires only a single cable connection

  • Only two flange connections for the entire measuring and control technology ensure the lowest risk of leakage.

Newsletter registration

In our newsletter you get the latest new

Register to newsletter

FOCUS-ON - Applications

1 products


Smart meter valve for flow, pressure and process control